![]() Plug the preamp in to power and you're ready to jump to the Sonos app section below. Step 2: From a turntable without a built-in phono preamp: As mentioned in the above section, you have to first connect your turntable to the external phono preamp and then connect the preamp to the RCA input of the Sonos Amp. Step 1: From a turntable with a built-in phono preamp: With an RCA cable, all you have to do is connect directly from the turntable's RCA output to the Sonos Amp's RCA input and it's ready to go. On the back of the Sonos Amp is a set of RCA inputs that you can connect to a turntable. Its 125 watts-per-channel is ample power, but its Sonos connectivity also allows you to wirelessly stream to any Sonos speaker in the house. ![]() The Sonos Amp ($699) is a good solution that allows you to add the Sonos network streaming experience to a set of third-party passive speakers. Jump to the Sonos app section below to get playing. Plug the preamp on to power and you're all set. Step 4: Then, from the preamp's output, similar to step 1 above, connect to the Sonos speaker's line input. If this your setup, you can skip ahead to the 'Play your vinyl with the Sonos app' section below. Step 3: If your turntable doesn't have a built-in phono preamp, and you've purchased an external one (which is usually a small box the size of an external hard drive), the only difference here is that you're going to first connect the turntable to the preamp's input with an RCA-to-RCA cable - same as before, white to white, red to red. House of Marley goes Lux with its revamped Stir it Up turntable Sonos Move smart speaker just got a big discount Step 2: Connect the other end of the cable to the Sonos speaker's USB-C (Era 100 and Era 500) or 3.5mm input ( Sonos Five). Depending on the Sonos speaker you have, you can either connect your 3.5mm cable directly to the speaker or to the 3.5mm adapter. Step 1: If your turntable has a built-in phono preamp, connect an RCA cable to the RCA outputs on the back of the turntable, with red going to red and white going to white (right and left, respectively). Here's how to connect your turntable to these Sonos Speakers. The Five and older Play:5 feature a 3.5mm line input. The only difference to note is that the two new Era speakers have a USB-C line-in port (pictured above), which will require a 3.5mm-to-USB-C line-in adapter. ![]() They currently include the Era 100 ($249), Era 300 ($449), Sonos Five ($549), and the discontinued Play:5. Simon Cohen / Digital Trends Connecting directly to a Sonos speakerĪs mentioned above, Sonos now has several speakers that it has outfitted with direct line-in ports. In many cases, a good phono preamp can improve the sound of a turntable with a mediocre internal preamp, so that's something to consider as well. There are several good preamps on the market, and they can run anywhere from $50 to several hundred dollars. Why? Because turntables themselves only output a very low signal, and the preamp boosts it so that it can be amplified properly. To connect your turntable with a Sonos speaker or system, you will either need one that has a built-in phono preamp (like the one pictured above) or you'll need to buy an external phono preamp (also known as a phono stage) to connect it to. ![]() Any turntable will do, technically speaking, and if you haven't purchased one ye,t we can suggest some that we think are the best. Show 1 more item The Pro-Ject T1 turntable's built-in phono preamp.ĭerek Malcolm / Digital Trends What turntable do I need?įirst things first: you're going to need a turntable. Phono preamp (built-in to the turntable or external) Sonos Five, Era 100, Era 300, Port, Amp, Play:5īluetooth-capable Sonos: Move, Roam, Roam SL, Era 100, Era 300
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |